Posted by Jerry on September 11th, 2005 — Posted in Journal, Woodwork
After a year or so the portable tightrope is still going strong – and is still strong enough for my weight. But my daughter had managed to find a source of 10mm wire rope at Revolve – the local tip shop – so it was time to revisit the tightrope.
A close inspection revealed that extensive use had taken some toll on the tightrope structure – the turnbuckle screws were beginning to bend (due to a temporary quick and dirty attachment of 12mm wire rope) and one of the pop rivets had lost its head on one of the support legs. Also the bolt leading to one of the turnbuckles had a stretched thread due to over-tightening at some point.
So it was off to Bunnings for new turnbuckles, wire rope thimbles and 10mm wire rope clamps. And why not pick up a couple of brackets too for good measure.
I drilled and replaced the damaged rivet, then replaced the turnbuckles and fitted the new 10mm wire rope. My daughter had noted that professional portable rigs had small circular platforms at either end – more stable than garden chairs, so this seemed like a good opportunity to upgrade the rig accordingly.
I had some 300mm pine boards lying around, so I scribed a circle and cut the discs out on the bandsaw (just a cheapo hobby GMC one, but it’s enough for small job like this one). Then a quick sanding to remove the high spots and a quick spray with some undercoat and then a couple of layers of enamel to make it weatherproof. And here is the result – a definite improvement on the original design!
Portable Tightrope
And yes the whole structure fits in the van at just a shade over two metres in length 🙂
Cheers
Jerry
Comments Off on Tightrope update
Posted by Jerry on September 5th, 2005 — Posted in Journal, Woodwork
What better way to spend Father’s Day in Canberra than to spend it at the Working With Wood Show at Exhibition Park in Canberra. These come around every year at about the same time, and showcase the latest and greatest tools for the amateur or semi-professional woodworker. The show prices are great (more on that later) but the real treat is seeing the demonstrations of woodworking techniques from turning, ornamental turning, box making, applying finishes, and heaps more.
Australian Woodworker magazine recently did a feature on Australian inventors over the past 20 years – and most of them turn up every year at the Working With Wood show – so you get to meet some great people sharing a passion for converting trees into heirlooms.
Among the highlights were seeing Roger Gifkin demonstrating his dovetailing jig; the guy who invented the WASP sander – which attaches to the workshop drill and has to be the fastest way to change sanding belts I’ve ever seen; and Stan ‘The Man’ Ceglinski of Mullumbimby Woodworks making bush furniture, and running his amazing Great Saw Race using a couple of 100 year old two-person saws. Then there was the Ozzie Jigs bloke – whose invention is featured in the Australian Design Museum – and the AngleMagthe list goes on.
There were demos of the Lucas sawmill, and a range of Westford chainsaw mills from Western Australia, such as this one:
Westford Chainsaw mill
And there were small slabbing attachments for smaller chainsaws (maybe next year!).
Of course if you set someone like me loose in a giant toyshop like the Working With Wood show you can expect that one or two things might wind up in my car at the end of the day. I even considered taking the motorbike on the basis that I would only get a few small items. Well, I carefully locked my best intentions away and armed myself with the plastic card and dutifully checked out the show specials.
First stop was CarbaTec – they have a shop in Fyshwick here in Canberra, but they were offering special show prices and then 10 percent off that – so I was soon carrying around a lovely Hamlet roughing gouge for the lathe. I ws sorely tempted by Robert Sorby goose necked turning chisels, but resisted manfully. Then it was off to Timbecon – the mob from Western Australia. I decided to leave the 1HP grinder… in the parcel pickup for later – this was accompanied by a great special combining an aluminium oxide wheel and a sharpening rest of really decent proportions:
The grinder, the toolrest and the roughing gouge
Then a quick glance at the triton offerings – I love the way their stuff is able to be retrofitted to even the earliest versions of the sawbench. I asked, in an offhand casual way, the price of the saw height winder kit – and the saw chassis upgrade so it would fit my old MK3 saw bench. What I saved there was more than the entrance fee to the show and those items were quickly added to the parcel pickup.
Triton height winder kit
And here it is mounted on the trusty Mk3.
I was getting the hang of this now, but needed just a little more practice – and that’s when I saw the router base and guide bushing kit. You see it’s like this. Last year I picked up a dovetail jig and a couple of dovetail router bits with attached bearings. But the bearings kept breaking, leaving me with a couple of perfectly good router bits, but no way to use them in the dovetail jig. With the new router base and guide bushes I can run the dovetail bits through the jig without fear of snagging the sides!
Router guide bushing kit
So that was the Working With Wood show for 2005 – and yes I had a great Fathers Day 🙂
Cheers
Jerry
Comments Off on Canberra Working With Wood show
Posted by Jerry on August 24th, 2005 — Posted in Journal, Motorcycling
Sunday was not quite perfect for riding – the drizzle threatened, but held off for the most part as I headed off up the Cotter Road to the Cotter reserve where the Canberra Veteran and Vintage Motorcycle Club was having a gathering.
They were a welcoming lot and there was a good selection of interesting machines. I was too slow in getting the camera out to catch the Brough Superior, but I managed to photograph some good bikes. Here is a selection:
Vincent Rapide
Vincent Rapide
Triumph speed twin
Norton Commando 850cc
Norton Commando 850cc
Royal Enfield 1923
Ducati 750cc Sport
AJS 18S
AJS Model 20
Cheers
Jerry
2 Comments »
Posted by Jerry on August 11th, 2005 — Posted in Journal, Recipes
In all the jeans controversy, one small comment by Chloe stood out: “any chance of the chocolate muffin recipe?” Well, I’ll let you into a secret – while I DO have a nice quick and easy muffin recipe, I cheated on this occasion and used “White Wings Shaker Muffins: Double Choc” in which you add one and one third cups of milk to the container, tap upside down (with the lid on) shake vigorously for about 30 seconds and squish out the mix into 6 muffin pans and bake in a pre-heated oven at 200C for 20 minutes. And here is the result:
Cheers
Jerry
12 Comments »
Posted by Jerry on August 9th, 2005 — Posted in Journal
You know, it’s the strangest thing. I went to brave the cold recesses of my woodwork shed yesterday – so naturally I would dress appropriately – old tee-shirt, fleecy sweatshirt and old jeans. Now I could have sworn I had washed and dried my jeans and that they were hanging up in my cupboard.
This is not the first time strange things have happened – perhaps they were taken by aliens, along with the odd single sock…
Meanwhile I think Sharon is getting creative again – she has started humming around the house, and has moved the ironing board out of her studio – so I guess she has some project on the go and that stuff is everywhere. This is not uncommon – Sharon works that way – spreads everything out and does a careful visual appraisal. At this point I know not to disturb things because everything is placed with a purpose when she is designing.
I’m guessing she has something like a stitch challenge going, because the last couple of nights she has disappeared from the computer and headed off to the studio – reappearing only for a quick coffee and a few muttered words like “progress” and “they’ll love this”… At which point I nod appreciatively and bake muffins.
As for the shed, well the daggy trackie pants had to make do – even though they’re not the same as those comfy old jeans.
At least I get some computer time for the blog 🙂
Cheers
Jerry
3 Comments »
