Posted by Jerry on September 27th, 2007 — Posted in Journal, New media, Technology, Theory
A while ago someone on Facebook poked me – and then wrote on my wall that they were not sure if they knew me well enough to poke, and whether this was too intrusive.
I had to think about that one. Where does a poke sit, ontologically speaking, – especially a virtual poke?
Clearly a poke is attention seeking, but it’s also a way of saying ‘I’m thinking of you’ – without the complication of words which could be misconstrued. Pokes are relatively undemanding – at least virtual ones are, so there is little pressure – I can choose to respond or not as I see fit and no-one will be upset if I don’t poke back, or if I do.
It is a way of keeping in touch without having to think too hard about a response, and it takes up little bandwidth, unlike the reams of emailed jokes and videos that seem to serve the same function in the email world.
I suppose, like any form of communication it could be seen as adding marks to an otherwise blank space, but it clearly performs a narrative and above all social function. And I suspect that that is why Facebook pokes are so popular – and it’s no accident that the poke function was one of the first to be added to Facebook and forms part of the core of the software.
As a micro-function of social software a poke helps to enact a sense of community and acknowledges that someone out there is thinking of you!
Cheers
Jerry
Comments Off on On the etiquette of pokes
Posted by Jerry on September 26th, 2007 — Posted in Journal, New media, Technology
According to the Wall Street Journal, it appears software giant Microsoft is seeking to claw back some of the advertising revenue from Google, by making a minority investment in social software company Facebook.
Depending on the degree of influence Microsoft seeks to gain, there are potential real downsides to this move, not least of which is the potential for facebook to lose its free-flowing open additions of micro-applications, like scrabulous (online scrabble game).
A further potential downside lies in whether or not Microsoft would start to remove some of the privacy safeguards currently in place in Facebook – at the moment, users can choose what is displayed publicly and what remains to be shared only with friends. I doubt people would want facebook to start acting like Quechup.
At this stage, however, it looks as though Facebook may hold out for a while as it is doing pretty well by sticking with its core business and providing a free-wheeling spontaneous place for people to meet each other and exchange pokes, sheep, flowers or even the odd haggis!
Thanks to Beth Kantor for pointing out this article 🙂
Comments Off on Microsoft in talks with Facebook ??!!!
Posted by Jerry on September 25th, 2007 — Posted in Journal, Woodwork
The 2003 Canberra Bushfires destroyed one third of the houses in our street, burnt the house next door and laid waste to our garden, burning down six trees in the front yard – including the largest, a ribbon-gum eucalyptus tree. I wanted to make a fitting personal memorial that would live on and symbolise the rebirth of the city after the firestorm. I had the ribbon-gum trunk milled into lumber which then spent the past four years drying in my shed. My aim was to make a new dining table.
With the acquisition of a couple of tools at this year’s Canberra Working with Wood Show I had been saving up for, the time was ripe finally to make a start on the table.
The ribbon-gum had been carefully stacked and stickered and it had not warped very much in the drying process. This timber is very moist and takes a lot of time to dry.
The raw lumber from the milling process was rough
After planing on the jointer though, the true character of the wood was revealed
The planing process took the lumber from 150mm x 75mm to 120mm x 25mm – just under six inches wide and about one inch thick. The garden was pleased with all the mulch produced by the shavings!
I had some square section from near the outside of the trunk – I figured there might be enough to use for the legs – and I was right.
I cut four pieces to length (720mm) and drilled rectangular holes with a Torquata mortising attachment for the drill press – it worked well – the device works the same way people make mortises normally – there is a drill to remove the bulk of the wood, and this operates inside a square chisel which then cuts the edges into a square shape. Advancing the timber along you can join the holes to make a rectangular mortise into which will go the tenons for the table rails.
I wanted to taper the legs on two sides, so I used an inexpensive taper jig on the table saw, setting the taper at an angle of 1.75 degrees (approximately). I then did a trial cut with some rubbish lumber and made some minor adjustments until the angle looked right, then tapered the legs – it worked like a charm.
Sure you can get fancy ones or make complicated ones, but I only had eight tapers to cut, so I was quite happy with a simple jig that I could slide along against the table saw’s fence. It’s safe enough as long as you keep the table saw’s guard in place and ensure that your hand steadying the timber is beyond the blade to begin with.
I then gave the legs a light sanding and cut the rails to length – adding two centimetres to allow for a one-centimetre tenon at each end.
I marked these up using the mortises in the legs directly, rather than relying on measurements. Then I cut these with a japanese pull saw and chiseled them to thickness – checking them at each stage of the fit to the mortise.
It was time for a test assembly – without glue at this stage as I wanted to ensure that the fit was right all round first.
The frame is to be a traditional apron style – using contrasting jarrah (the red looks great against the pale ribbon-gum), and will have two cross braces, as well as the usual traditional corner braces. The pale slender tapered legs will give the table a light and airy feel, while being plenty strong enough to take the eucalyptus top.
I laid out the boards roughly to get a sense of the overall feel and dimensions. I am still debating with myself as to whether or not to use breadboard ends.
The boards will be biscuit jointed together and the top secured with traditional buttons. I’ll test a couple of different finishes and decide later whether to varnish, or use an oil finish.
The finished table will be just over two metres in length and 1.2 metres wide and will seat 8-10.
But tomorrow I shall disassemble the frame and do the finish sanding on each piece so there are no hard to reach corners, and I’ll post more as the table progresses 🙂
Cheers
Jerry
2 Comments »
Posted by Jerry on September 23rd, 2007 — Posted in Journal, Motorcycling
With perfect motorbike weather it seemed like a good idea to get a bunch of folks together to do a short easy run round the twistys behind Canberra – and there had been some talk on the Canberra Riders forum of doing a novice run – with about even numbers between newer riders and more experienced riders. The idea is that the newer riders can get experience riding with a group without the pressure that can come from trying to keep up with the hard core racers. The Canberra Riders are good that way – a loose group of riders across a wide range of skills from new learners to old stagers and some pretty quick racers in between. But they’re very supportive of other riders and willing to share knowledge and expertise 🙂
So after yesterday’s cruise to Bungendore, the antique Honda Bol d’Or was ready for another gentle run. And Gosling1 had made a suggestion on the forum that a run to Tidbinbilla might be a good one for a novice run. Some of the wrong bits of Seph’s bike had recently come in contact with the ground so he was looking for a gentle proving run to make sure the repair on the alternator cover was oil-tight, and the bike was straight. Ausjc is a learner looking to gain experience, and Gosling1 had done much to ensure that Seph’s bike was back on the road after a couple of weeks.
So with the finishing touches done they all headed over to my place for a quick pre-ride brief and we headed off up the Cotter Road with a stop at the car park at the old Cotter Bridge (now causeway) – this is the site of the old Cotter Road Pub that was destroyed in the Canberra Bushfires in 2003.
We met up with a mob of other riders and admired some fine machines (that black Honda Bol d’Or is particularly nice 😉
Then on for the ride to Tidbinbilla Deap Space Tracking Station – there’s a great coffee shop there called the ‘Moon Rock Cafe’ – very friendly to bikers and excellent service
The dishes made a great backdrop to the bikes
Funny how that black Honda kept getting into the photo!
And there was some good discussion about some of the local roads and some good places to explore for later rides. And what better backdrop to a coffee is a dish big enough to play cricket on 🙂
Seph’s bike needed push starting at every stop – he found later that great results can be achieved by plugging two wires together just near the clutch lever…
And I’d also like to say thanks to the anonymous rider who found my phone on the road, made the right assumptions as to likely destination, and returned it to me at Tidbinbilla – that sort of thing restores faith in human nature 🙂 And I’ll be keeping the phone in a zip-up pocket from now on 🙂 And yeah the phone still worked – they made the old bricks tough!
Thanks guys for a great ride and hopefully we’ll do it all again soon
Cheers
Jerry
Comments Off on Canberra Riders novice run to Tidbinbilla
Posted by Jerry on September 20th, 2007 — Posted in Journal
Gibson’s ‘Wintermute’ may be coming to Second life, according to an article on the BBC news website it appears researchers are preparing to develop smart bots that can respond to stimuli and learn – great for SL pets. The downside is that I can see this becoming the new ‘tamagochi’ in which pets will become so demanding of their owners to seek rewards and virtual food that people will literally become addicted to these creatures 🙂
It might also develop into a turing machine so ultimately – to paraphrase that famous quote – in Second Life no one knows you’re a bot! But I think such days are quite a way off. I can certainly envisage smart dog-like pets.
Of course there could also be a darker side to such technologies – smart ID sniffers that masquerade as pets giving you virtual gifts that find ways to entice you out of your password or credit card details – but then such bots are already around according to this report.
More likely will be the commercial applications that respond to the profile information in the avatar to target advertising – I’m sure it’s only a matter of time before a context sensitive ‘Google Adsense’-type system comes to Second Life so that as you approach a vendor it responds, not just with freebies, but ones that offer items geared towards the individual interests of the user.
Another element to this might well be tailored rides – hop onto your personal dragonfly and it will take you to various locations in SL that match your profile settings or your taste in art, music, clothes, shoes or hair – responding differently for each rider 🙂
It could be the start of a whole new shopping experience!
2 Comments »
